Chapter 44: Go-By Reference P&IDs

1 44.1 External floating roof tank
2 44.2 Fixed roof tank with agitator
3 44.3 Reverse Osmosis P&ID sheet 1
4 44.4 Reverse Osmosis P&ID sheet 2
5 44.5 Typical antiscalant and acid dosing tank / pumps for R O Unit
6 44.6 Reference P&ID – package item representation. Vendor will provide P & ID of system inside his package.
7 44.7 Typical Hazardous waste incinerator facility receipt tanks
8 44.8 Typical slurry receipt tank at hazardous incineration facility
9 44.9 Solids waste handling system at hazardous waste facility
10 44.10 Rotary Kiln Incinerator
11 44.11 NOx reactor and evaporative cooler as first Air Pollution control (APC) downstream of incinerator
12 44.12 Bag Filter and Venturi as second APC downstream of incinerator
13 44.13 Caustic scrubber as final APC in incinerator
14 44.14 Centrifugal 3-stage air compressor
15 44.15 Lube oil system for centrifugal air compressor of fig 44.14.
16 44.16 Simple agitated preparation vessel with pressure / vacuum water seals
17 44.17 Batch Reactor vessel
18 44.18 Additives section in batch polymer plant
19 44.19 Coalescer with bootleg facility
20 44.20 Three phase bucket and weir separator
21 44.21 Two phase separator (reflux drum)
22 44.22 Kettle type reboilers
23 44.23 Air cooled primary cooler with trim S&T exchanger downstream
24 44.24 U-tube exchanger
25 44.25 Sour water stripper
26 44.26 Vertical thermosyphon reboiler with condensate pot
27 44.27 Distillation column
28 44.28 Balanced draft fired heater
29 44.29 Fuel skid for heater of fig 44.28
30 44.30 Reciprocating compressor first stage
31 44.31 Reciprocating compressor second stage
32 44.32 Reciprocating compressor third stage
33 44.33 Cooling tower
34 44.34 Mechanical deaerator with vacuum pump
35 44.35 Reactor closed loop MEG system
36 44.36 Raw / Fire water storage and pumping
37 44.37 Finishing Bagging line Typical P&ID
38 44.38 Dry Additives P&ID
39 44.39 Bulk Storage Silo and transport P&ID
40 44.40 Pig Launcher P&ID
41 44.41 Pig Receiver P&ID

Share this post